ZV-893PB Polished Unlacquered Brass Fitter Adapter From 2¼" to 3¼"
ZV-893DK Antique Brass Finish Fitter Adapter From 2¼" to 3¼" (Pictured)
ZV-893OB Oil Rubbed Bronze Finish Fitter Adapter From 2¼" to 3¼"
As styles change & tastes change, we like different shades on our lamps and fixtures. Many of the older lights and lamps have small fitter rings for 2¼" glass shades. This product allows you to use a 3¼" fitter shade on that old fixture!
This adapter is made extra strong by casting it from solid brass (not stamped), so the strength & reliability are undeniable. We also gave this adapter four fitter screws, instead of the normal three, for increased stability and a more even mounting. After casting these adapters, they are lathe-turned to our exact specifications before finishing with our hand-applied patinas.
Cautions and concerns when using adapters:
1. Is your 2¼" fitter and lamp stem strong enough to take a larger shade?
2. If the proposed shade is enclosed, will heat be able to escape? You may need to vent heat off an incandescent bulb.
3. This adapter is not recommended when the metal socket has a clamp-on fitter, as the extra weight of a larger shade might pull it apart.
4. Sometimes using an adapter makes the bulb too deep in the shade. We offer socket extenders that may be stacked to put the bulb into the "best light" position in your new shade.
For adapting a 2¼" fitter to 4", please see our part number ZV-894DK.
Measurements:
Outside Dimensions: 3½"
Inside Diameter: 3 5⁄16"
Overall Height: 15⁄16" (3⁄8" of this measurement disappears into your 2 ¼" fitter, leaving only ½" visible.)
Center Hole (for socket): 1 ¾"
Fitter threads are 8/32".
Disclaimer:
This item may have flaws in the finish as well as in the casting. This comes from our casting process and does not in any way affect the overall performance of the item and in most cases the areas affected will not even be seen once the fitter is attached and the shade is mounted,